Christie Mirage HD User Manual page 173

Serial Digital Input Module
38-804602-xx
Dual SD/HD-SDI Module
38-804656-xx
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
Features
•
Supports Digital Visual Interface (DVI) single-channel
•
Supports VESA® Extended Display Identification Data (EDID™)
•
Provides an active-loop-through using a DVI connector (conforming to the
DVI Specification)
The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single
BNC connector. The signal can loop through the
SERIAL IN
another device (such as another projector). Inputs are 75
SDI Features
•
Accepts serial digital 4:2:2 component video (YCbCr)
•
Provides both a
SERIAL IN
LEDs for signal and error
•
SMPTE 259M compatible
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be
tiled across multiple screen displays, overlapped for extra-bright displays, or
distributed to additional projectors for multiple, same-image screens.
Dual SD/HD-SDI Features
•
Accepts and decodes up to two serial digital inputs
•
Outputs up to two 10-bit YCbCr 4:2:2 video signals
•
Provides input(s) to output(s) loop-through capability
•
Supplies interchangeable inputs as part of the Picture-in Picture display
•
SMPTE 259M and 372 compatible
Appendix F: Optional Input Modules
and a BNC connector; includes status
SERIAL OUT
BNC out to
SERIAL OUT
Ω terminated.
F-3