Appendix E: System Integration; Query Command - Christie Mirage HD User Manual

Appendix E: System Integration

E-2

Query Command

(GIO?)
(GIO! "HHLLHLH" "OOIOOOI")
(GIO? C2)
(GIO! C2 O)
(GIO? 2)
(GIO! H)
Real Time Event
Use the serial command RTE to specify an action that is initiated at a particular time or based
on an external stimulus.
For General Purpose IO "G"
Parameter
P1
P2
P3
P4
Example 2. Projector powers up when a switch on the external device is turned on.
(GIO C2 I)
(RTE G 2 H "(PWR 1)")
(RTE G 2 L "(PWR 0)")
Request the state and configuration of all pins
Reply of pin state and configuration
Request configuration for pin #2
Reply with pin #2 configuration as output
Request the state of pin #2
Reply with pin #2 state as high
Name Value
RTE type G (Real Time I/O Event)
I/O bit 1-7
Pin state H = High
(1 Character) L = Low
(String) "LHXXXHL" Combine multiple inputs and
trigger occurs when all conditions are met
Commands Any valid serial protocol command for the device
Set pin #2 configuration as input
Power on when pin #2 set to high
Power off when pin #2 set to low
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher