Christie Mirage HD User Manual page 44

Section 3: Operation
What Channels
Are Defined So Far?
3-16
All available channels are listed in the Channel Setup menu, which describes how
each channel can be accessed and which serves as the gateway for editing, copying
and deleting channels.
Press from the
Menu
presentation level to display
the Main menu. To display the
Channel Setup menu,
3
press , or move the
highlight to the Channel Setup
option and press . The
Channel Setup menu will
appear (see sample at right),
with the active channel
highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU?
lists all channels defined so far and indicates where they
are connected on the input panel. The far left column lists
channel numbers currently defined. The values in the far
right columns indicate horizontal and vertical
frequencies—if someone has defined a name for this
channel, it appears here instead. Remaining columns contain details pertaining to each
channel setup, such as its switcher number (always 0 = projector), slot location, a
variety of icons indicating access to each channel, and an abbreviated description of
each signal type. See Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use
remaining channels not visible in the initial display of channels.
Either channel list, whether the
SIGNAL TYPE —
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an "i" (interlaced signals) or "p" (progressive
signal"). See Table 3.2.
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press if you want to copy the selected channel or delete this or other
Func
channels. See Copying or Deleting a Channel below.
All Channels Appear in the
Channel Setup Menu
This menu
Channel
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Video
Composite Video
Digital
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
and to see the
key list or the Channel Setup
To copy, delete or edit a channel,
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher