Table of Contents
Advertisement
Section 3: Operation
3-12
Slide bars in menus –
parameter, such as size or vertical stretch, appears to the left
of its slide bar icon (adjustment window). This number often expresses a percentage,
or it may have units associated with it (such as pixels, degrees Kelvin, etc.),
depending on the specific option. Press
down—both the number and the length of the bar change accordingly. Hold for
continuous adjustment. Or press
number entry via the keypad and then press
"Direct" slide bars -
For quick access, you can access Gamma, Brightness, and
Contrast slide bars without traveling the menu system. For example, simply press
to immediately display the same contrast slide bar accessed with the Contrast option
in the Image Settings menu.
Use the arrow keys to adjust a direct slide bar, or press
number from the keypad, then
you are done, press
Exit
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off
or Menu Preferences menu) — the slide bar just won't be visible. 2) A
(see
OSD
direct slide bar disappears if it is not used within five seconds.
Checkboxes -
Conditions are present if its adjacent
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press
uncheck. If a checkbox is numbered, simply enter its number to immediately toggle
the checkbox.
Pull-down lists –
To see a pull-down list of options available for a given parameter
labeled with a , you can:
•
Highlight it and press
•
Enter the menu option number
Use the
or
keys to navigate up and down within the list (the current choice
is noted with a small
). Press
∋
Figure 3.3).
Communications
Baud Rate for RS232
1.
Baud Rate for RS422
2.
Projector
3.
Network Routing
4.
Ethernet Settings
5.
Broadcast Key
6.
Backlight
7.
Front IR
8.
Back IR
9.
Wired Keypad
0.
The current value for a given
to activate a slide bar text box for specific
or
or
to save and return to your presentation.
, or highlight and use
(Enter)
to choose an option from the list, if desired (see
115200
115200
004
All Joined
On
On
Off
Example of Pull-Down List
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
to gradually adjust the setting up or
to save (or press
to cancel).
Exit
and enter a specific
to save (or
to cancel). When
Exit
to check and
1.
Separate
2.
RS232 and RS422 Joined
3.
RS232 and
Ethernet Joined
4.
All Joined
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
Cont
to
Hide quick links:
Advertisement
Table of Contents
