Table of Contents
Advertisement
YPbPr Signals
(COMPONENT VIDEO)
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
Figure 2.7. Connecting RGB and Sync
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB
signal, specify this Color Space option within the Image Settings menu. See 3.5
Adjusting the Image. 2) To connect YPbPr signals–such as from DVDs or analog HDTV
sources–to
, use the red, green and blue BNCs as described in YPbPr Signals
INPUT 1
(below).
Connect a YPbPr signal (component video) to
2.8.
NOTES: 1) If, for some reason, the projector fails to recognize a YPbPr signal,
specify this Color Space option within the Image Settings menu. See 3.5, Adjusting
the Image. 2) Do not connect digital component signals (known as YCbCr) to
. Install an appropriate optional module in
1
Figure 2.8. Connecting YPbPr sources
Section 2: Installation and Setup
or
as shown in Figure
INPUT 1
INPUT 2
or
for this.
INPUT 5
INPUT 6
INPUT
2-13
Hide quick links:
Advertisement
Table of Contents
