Make, Answer, Or End A Cell Call - AT&T TL86103 User Manual

Telephone operation
Telephone operation

Make, answer, or end a cell call

The TL86103 can be used to make or answer calls on the cell lines. You can
connect a maximum of 2 Bluetooth enabled cell devices to the telephone base.
Both cell devices can be used on two cell lines at the same time.
Using a cordless handset:
To make a cell call:
• Press A CELL or
Press DIAL ,
To predial a cell call:
• Enter the telephone number, and then press
To answer a cell call:
/SPEAKER,
• Press
To end a cell call:
• Press OFF/
CANCEL
Using the telephone base:
To make a cell call:
CELL A
• Press
DIAL
Press
To answer a cell call:
Press SPEAKER
•
-OR-
• Lift the corded handset.
To end a cell call:
• Press the corresponding cell button, CELL A
-OR-
• Press SPEAKER
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
• If you do not want to answer the call, press
• When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed. Press
CONNECT on the telephone base to connect your cell phone to the telephone system. Refer to
Bluetooth connection from idle mode on page 26 and Connect/disconnect an active device
on page 27.
• You can also make or answer a cell call using
the Installation and Operation Guide in the CD-ROM which comes with the package.
B CELL, and then enter the telephone number.
/SPEAKER,
A CELL, or
, or place the cordless handset into the charger.
or CELL B
SPEAKER
or
, CELL A
or return the corded handset to the telephone base.
A CELL, or B CELL to dial.
B CELL.
, and then enter the telephone number.
.
, or CELL B
REJECT .
AT&T Softphone Call Manager. Please refer to
54
A CELL or
.
or CELL B
B CELL.
.