AT&T TL86103 User Manual page 77

Telephone operation
Redial
-OR-
You can also insert the area code to the redial number before dialing.
Enter the area code in idle mode, and then press REDIAL/
1.
2. Press CID, DIR, or REDIAL/
number displays, and then press
front of the selected redial number.
3. Press LINE 1/
line 2, or press
Using the telephone base:
Press REDIAL/
1.
2. Press CID, DIR, /RECORD, or /DELETE to browse until the desired
number displays. The telephone base beeps twice at the end of the list.
3. Press LINE 1, LINE 2, or SPEAKER
Cell A or CELL B
-OR-
1. Press LINE 1, LINE 2, or SPEAKER
Cell A or CELL B
2. Press CID, DIR, /RECORD, /DELETE, or REDIAL/
browse until the desired number displays. The handset beeps twice at the
end of the list.
• If you are using the cell line, press
DIAL
3. Press
-OR-
You can also insert the area code to the redial number before dialing.
1. Enter the area code in idle mode, and then press REDIAL/
2. Press CID, DIR, /RECORD, or /DELETE, or REDIAL/
to browse until the desired number displays, and then press
area code will be added in front of the selected redial number.
Press LINE 1, LINE 2, or SPEAKER
3.
Cell A or CELL B
, LINE 2/
FLASH
A CELL or
in idle mode.
PAUSE
to dial using the cell line.
to use the cell
to dial the number displayed.
to dial using the cell
repeatedly to browse until the desired
PAUSE
INSERT
. The area code
, or /SPEAKER to dial using line 1 or
FLASH
B CELL to dial using the cell line.
to dial using line 1 or line 2,
to use line 1 or line 2,
line, and then press REDIAL/
INSERT
to dial using line 1 or line 2,
line.
71
PAUSE
will be added in
or press
repeatedly to
PAUSE
to select the desired number.
PAUSE
PAUSE
INSERT
in idle mode.
or press
.
PAUSE
in idle mode.
repeatedly
. The
or press