Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, follow the steps to connect the telephone base with a
standard dual-stud telephone wall mounting plate. You may need a professional
to install the wall mounting plate.
Tabletop to wall mount installation
1.
Unplug the power adapter from the power outlet. Unplug the telephone
line cord from the wall jack (or DSL filter).
2.
Put the corded handset aside. Hold down the switch hook on the
telephone base, and then slide the handset tab upwards to remove it
from the slot. Rotate the handset tab by 180 degrees. Then, replace the
handset tab into the slot until it locks into position.
3.
Press down on the tabs of the wall mount bracket to release it from
tabletop orientation.
4.
Rotate the wall mount bracket down and push it into the telephone base
until it clicks into place.
5.
Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch. Align
the slots on the back of the telephone base with the studs of the wall
mounting plate.
6.
Slide the telephone base down until it locks securely. Bundle the
telephone line cord and power adapter cord neatly with twist ties.
1
4
2
5
15
3
6