Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset or the telephone base:
1.
When your device shows Press and hold [PTT] to talk, press
INTCOM. The screen shows Switch to Intercom?
2.
Press SELECT. Your device displays Calling BASE or
Calling HANDSET X. The destination device briefly shows Push to talk
Ended, and then HANDSET X is calling or BASE is calling. The destination
device rings.
3.
Press
LINE
1/FLASH,
on the destination handset, or press
(0-9, or TONE ) on the telephone base to answer the intercom call. Both
devices now show Intercom.
To end the intercom call, press OFF/CANCEL or or
4.
handset, or place the cordless handset in the charger; or press
or place the cordless handset in the charger; or press
telephone base. Both screens show
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
Using a cordless handset or the telephone base:
•
During a one-to-group PTT call, press
A CELL, or
CELL A , or CELL B
automatically and the outside call is answered.
•
During a one-to-group PTT call, press
A CELL, or
1
LINE,
2
LINE,
answers the outside call. The PTT call continues for the rest of the PTT
participants.
•
To leave the PTT call without answering the incoming call, press
OFF/
CANCEL
telephone continues to ring.
LINE 2/FLASH,
. Both screens show Intercom ended.
B CELL
on the initiating handset, or press
on the telephone base. The PTT call ends
B CELL
on any one of the destination handsets, or press
CELL A , or CELL B
on your handset or CANCEL on your telephone base. The
or any dialing keys (0-9, or TONE )
or any dialing keys (
1
LINE,
2 LINE,
END
LINE 1/
,
FLASH
LINE 1/
,
FLASH
on the telephone base. That device
84
or any dialing keys
or any dialing keys
on your cordless
press
END
LINE 2/
,
FLASH
LINE
1, LINE2,
LINE 2/
,
FLASH
on the