Answering system
Answering system settings
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). By default, the remote access code
is 19.
Using the telephone base:
1.
When the telephone base is in idle mode, press
enter the main menu.
2.
Press
SELECT
3.
Press CID, DIR, /RECORD, or /DELETE to
highlight Mailbox 1 or Mailbox 2, and then press
4.
Press
CID, DIR, /RECORD, or /DELETE
highlight Ans system setup, and then press
CID, DIR, /RECORD, or /DELETE
5.
Press
highlight Remote code, and then press
6.
Use the dialing keys to enter a
backspace and delete a digit.
7.
Press
SAVE
to select Answering system.
to save the setting. You hear a confirmation tone.
to
SELECT
to
SELECT
two-digit number. Press
112
MENU
to
ANS SYSTEM SETUP
Cal l screening
# of rings
Remote code
BACK
SELECT
.
REMOTE CODE
.
BACK
.
/DELETE
p
SELECT
q
19
p
SAVE
q
to