AT&T TL86103 User Manual page 31

Bluetooth
Bluetooth setup
8. The screen displays Adding Headset A when the base
is connecting to your headset.
9. When a device is successfully connected, the telephone
base displays Headset A is added and connected to
base and the corresponding status icon (
You hear a confirmation tone. CELL B/HEADSET
on the telephone base turns on.
If you have trouble pairing your cell phone or headset, it may not be
compatible with your TL86103. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth
NOTES:
• The pairing process may take up to one minute.
If the pairing process fails, turn off the Bluetooth feature on your headset and on the TL86103
•
by pressing Cell A
pair your headset and the telephone base. In some cases, it may take you a few attempts to
complete the pairing process.
• When a connected headset is charging, it may disconnect from the telephone base and the
CELL B/HEADSET
need to turn on the headset and reconnect it to the telephone base again.
• Refer to the user's manual on how to set your headset to discoverable mode.
or CELL B . Repeat the steps of To pair and connect a headset to
light on the telephone base turns off. For some headset models, you may
B ) displays.
.
25
Headset A
is added
and connected to
base.
light