AT&T TL86103 User Manual page 109

Caller ID
Caller ID operation
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 100).
2. When the desired entry appears, press # (pound key) repeatedly to show
different dialing options.
3. When the number is in correct format, press SAVE. The telephone base
displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
• Press CID
/SKIP to move the cursor to the right.
• Press /DELETE
• Press and hold
• Press and hold
5. Press NEXT.
6. Press CID, DIR, /RECORD, or /DELETE
following types:
• Home
• Cell
• Work
• Other
7. Press NEXT. The telephone base displays EDIT NAME.
8. Use the dialing keys (page 89) to edit the name.
CID
• Press
/SKIP to move the cursor to the right.
• Press /DELETE
• Press and hold
• Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press #
(pound key).
9. Press SAVE
NOTES:
• If the caller's name you received from the telephone service provider is all in capital letters, the
first letter of every word remains a capital letter, while other letters become lower case. However,
the next letter after the prefix "Mac", "Mc", "D'", "C'" or "O'", is kept as a capital letter. For
example, the "D" in "MacDonald" is kept as a capital letter. Another exception is that "VAN DER"
will be changed to "Van der".
• If the telephone number from the caller ID information has already been saved in the directory
under a different name, the new name will overwrite the old one.
or /REPEAT to move the cursor to the left. Press DIR or
or BACKSP
/DELETE
/PAUSE to insert a dialing pause (a p appears).
REDIAL
or /REPEAT to move the cursor to the left. Press DIR or
or BACKSP
/DELETE
to confirm. The telephone base shows Saved.
to erase a digit.
to erase the entire entry.
to highlight one of the
to erase a character.
to erase all characters.
103