Push-To-Talk (Ptt); Turn Ptt On Or Off - AT&T TL86103 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages from one handset or
telephone base to the speakerphone of one or a group of other
devices. Press and hold PUSH TO TALK on a handset or PTT on
the telephone base to begin a two-way communication.
• Only one device can talk at a time. While talking to another
device, press and hold PUSH TO TALK on the handset or PTT
on the telephone base.
You must release PUSH TO TALK on the handset or PTT on the telephone base,
•
so the other person can respond.
• Only one PTT session can be active at a time.
• While PTT is in use between two devices, other devices cannot use the
intercom feature but can access the answering system.
• When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.

Turn PTT on or off

Using a cordless handset:
Press PUSH TO TALK when the handset is not in use. The
1.
PUSH TO TALK menu displays.
2. Press CID or
press SELECT.
3. Press CID or
press SELECT.
Using the telephone base:
Press PTT when the telephone base is not in use. The
1.
PUSH TO TALK menu displays.
2. Press CID, DIR, /RECORD, or /DELETE
highlight PTT On/Off, and then press SELECT.
3. Press CID, DIR, /RECORD, or /DELETE
choose On or Off, and then press SELECT.
NOTE: The handset or the telephone base screen displays PTT
when PTT is turned off.
DIR to highlight PTT On/Off, and then
DIR to choose On or Off, and then
to
to
/
79
PTT
PUSH TO TALK
BASE
PTT On/Off
BACK SELECT
INCOMING PTT
On
Off
BACK
SELECT
PUSH TO TALK
HANDSET
PTT On/Off
p
SELECT
BACK
q
INCOMING PTT
On
Off
BACK SELECT
1