Make, Answer Or End A Softphone Call - AT&T TL86103 User Manual

Telephone operation
Telephone operation

Make, answer or end a softphone call

You can make and receive calls on line 1, line 2, or cell lines, or softphone VoIP
calls by using the AT&T Softphone Call Manager installed on your computer
(see page 11).
Before managing a softphone VoIP call, make sure Skype or Lync is installed.
To make a Skype call:
Using a cordless handset or the telephone base:
• Enter the telephone number in idle mode, and then press
a softphone call.
To answer an incoming Skype/Lync call:
Using a cordless handset:
• Press /SPEAKER or
Using the telephone base:
Press SPEAKER
•
softphone call.
To hold a Skype/Lync call:
Using a cordless handset or the telephone base:
Press HOLD to hold the softphone line. The handset screen displays
•
PC CALL ON HOLD.
• Press PC CALL
To end a Skype/Lync call:
Using a cordless handset:
OFF/
• Press
CANCEL
Using the telephone base:
• Press SPEAKER
NOTES:
• Only Skype can make a softphone VoIP call.
• Make sure the USB cable is connected to the telephone base and your computer.
• Make sure the AT&T Softphone Call Manager is launched on your computer.
• During an incoming call, the screens display Skype and Lync without any specfic details about
the name and number of the caller. If the caller ID announce (page 39) is turned on, the
telephone will announce Call from Skype or Call from Lync.
• If you do not want to answer the call, press
Missed call from softphone is logged in the caller ID log of the telephone system. Skype or
•
Lync is stored as the name of the caller ID log entry.
• When the ringer of PC line is off, the screens of cordless handsets and the telephone base
P
display .
C
• You can also make a Skype call or answer a Skype/Lync call using
Manager. Please refer to the Installation and Operation Guide in the CD-ROM which comes
with the package.
ANSWER
or lift the corded handset to answer an incoming
to resume the call.
, or place the cordless handset into the charger.
or return the corded handset to the telephone base.
to answer an incoming softphone call.
REJECT .
58
PC CALL to dial
AT&T Softphone Call