Add A Headset - AT&T TL86103 User Manual

Bluetooth
Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your Bluetooth headset
user's manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
Using the telephone base:
MENU
1. Press
enter the main menu.
Press CID, DIR, /RECORD, or /DELETE to
2.
highlight Bluetooth, and then press
3. Press CID, DIR, /RECORD, or /DELETE to
choose Add device, and then press
4. Press CID, DIR, /RECORD, or /DELETE to
highlight Add headset, and then press SELECT. The
screen displays
is connected to cell, please disconnect it.
• If there are already 4 paired devices on the device
list, the 4th one will be automatically removed,
regardless of whether the new device pairing is
successful or not.
• If there is another headset already active, the screen
will show
be ready for
followed by Headset X is deactivated.
NEXT
5. Press
discoverable mode. Set your headset to discoverable
mode (refer to the user's manual of your headset), and
then press NEXT.
• All devices that are connected to the telephone base
are temporarily disconnected.
6. The screen displays Searching for Bluetooth headsets...
7. When the screen displays the found devices, press
CID, DIR, /RECORD, or /DELETE to highlight your
headset, if necessary, and then press
• Enter the PIN of your headset, if required. The PIN for
most Bluetooth devices is 0000 (refer to the user's
manual of your headset), and then press NEXT.
on the telephone base in idle mode to
Please wait..., followed by If headset
Only Bluetooth headset in slot B can
connection, and then Please wait...,
. The screen displays Pls set headset to
SELECT
.
SELECT
.
SELECT .
24
Cal ler ID log
Intercom
Page al l devices
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
DEVICE LIST
Add cellular
Add headset
BACK SELECT
Pls set headset
to discoverable
mode
BACK NEXT
Searching
for Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
BACK SELECT
Adding Headset A
BACK