Table of Contents
Advertisement
After removing the paper
1.
Open and close the front cover. Doing this
will clear the error message.
6.2
When Problems Occur
Before treating the problem as a machine breakdown, refer to the following table and check
the printer condition again.
WARNING
• Never open or remove machine covers that are secured with screws unless specifically
instructed in the user guide. A high voltage component can cause electric shock.
• Do not try to alter the machine configuration, or modify any parts. An unauthorized
modification can cause smoke or fire.
Note
• Information on incorrect print processing will be stored in SimpleMonitor. When no print processing is
carried out, check SimpleMonitor. Print data that cannot be correctly processed may be discarded. For
details on how to activate SimpleMonitor, refer to "Installing SimpleMonitor" (P. 33).
No Power
Symptom
No power.
Is the power of the printer switched off? Push the power switch to the < | > position to
switch on the power.
Refer to
• "3.2 Switching On and Off the Power" (P. 40)
Is the power cord disconnected or not securely connected? Switch off the power of the
printer and connect the power cord to the power outlet again. Then, switch on the
power of the printer.
Refer to
• "1.4 Connecting the Power Cord" (P. 19)
Is the power cord connected to a power outlet with the correct voltage? Connect the
printer exclusively to a power outlet with a suitable voltage and current rating.
Refer to
• "For Power & Earth Connection" (P. 10)
Is the power outlet providing electricity? Check the status of the fuse box.
Reason/Action
6.2 When Problems Occur
63
Advertisement
Chapters
Table of Contents
Troubleshooting
