Paper Cannot Be Fed Correctly; Others - Fuji Xerox DocuPrint 2050 User Manual

Paper Cannot Be Fed Correctly

Symptom
Paper cannot be fed.
Paper jam.
Multiple sheets of paper are
fed.
Paper is fed at an angle.

Others

Symptom
Strange noise.
Is the paper correctly loaded? Load the paper correctly. For transparencies, postcards
or envelopes fan them well first to allow air to enter between each sheet before loading.
Refer to
• "Loading Envelopes" (P. 43)
• "5.2 Loading Paper" (P. 55)
Is the paper damp? Replace it with paper from a new ream.
Refer to
• "5.2 Loading Paper" (P. 55)
Is the correct type of paper used? Load the correct type of paper.
Refer to
• "5.1 About Paper" (P. 52)
Is the paper tray set correctly? Push the paper tray completely into the printer.
The paper is jammed. Remove the jammed paper.
Refer to
• "6.1 When Paper Jams" (P. 59)
Is the printer placed on a flat location? Place the printer on a stable flat surface.
Refer to
• "For Installation & Relocation" (P. 9)
Are the paper guides set in the correct positions? Set the paper guides to the correct
positions.
Refer to
• "5.2 Loading Paper" (P. 55)
Is the printer placed on a flat location? Place the printer on a stable surface.
Refer to
• "For Installation & Relocation" (P. 9)
Is the top cover, front cover, or front unit opened? Close the top cover, front cover or
front unit securely.
Is the paper tray set correctly? Push the paper tray completely into the printer.
Are there foreign objects inside the printer? Switch off the power and remove any
foreign objects from inside the printer. If the object cannot be removed unless the
printer is disassembled, contact our Customer Support Center or your dealer.
Reason/Action
Reason/Action
6.2 When Problems Occur
65