Table of Contents
Advertisement
5.
From the [Details] list, select the custom setting to be defined.
6.
Specify the length of the short edge and long edge under [Settings for]. You can
specify the values either by entering figures directly or using [ ] [ ].
The length of the short edge cannot be longer than the long edge, even if it is within
the specified range. The length of the long edge cannot be shorter than the short
edge, even if it is within the specified range.
7.
To assign a paper name, select the [Name Paper Size] check box and then enter the
name at [Paper Name]. Up to 14 characters can be used for the paper name.
8.
If necessary, repeat steps 5 to 7 to define another custom paper size.
9.
Click [OK].
10. On the [Configuration] tab, click [OK].
50
4 Printing
5
6
7
Advertisement
Chapters
Table of Contents
Troubleshooting
