Gyro Mixing "Ryro Mix - FUTABA 4PK-2.4G SuperR Instruction Manual

Hide thumbs Also See for 4PK-2.4G SuperR:
Table of Contents

Advertisement

This function is a remote gain function which adjusts the sensitivity of the Futaba car
rate gyro at the T4PKSR side, and is mixing that uses the 3rd CH to adjust the gyro sen-
sitivity.
When using the 4PKRS by switching the AVCS and normal modes use PS1, PS2 or PS3
with the function select switch function (p.96).
For a description of the car rate gyro mounting method and handling, refer to the rate
gyro instruction manual.
Setting Special mixings
When the 3rd CH was set to ACT at Brake Mixing (p.74) or when 4WS Mixing (p.88)
is used, Gyro Mixing cannot be used.
Press t
When the set SW is operated
in the opening screen state,
the Gyro mode is displayed
here for about 1 seconds.
AVCS / NORMAL Modes
The gyro has 2 operating modes: NORMAL mode and AVCS mode. In the AVCS mode, the angle
is controlled simultaneously with NORMAL mode rate control (swing speed). The AVCS mode in-
creases straight running stability more than that of the NORMAL mode. Because the feel of opera-
tion is different, choose your favorite mode.
NORMAL
Countersteers against outside
force, but cannot correct the
skid direction.
AVCS
Corrects the skidding direc-
tion and forcefully maintains
the heading.
92
Gyro Mixing "GYRO MIX"
he
button
The display is different depending on
the type selected with MODE. The fig-
ure shown below is for the SW SEL.
Special Mixes "S-MIX" (GYRO MIX)
Displayed when the Gyro Mode
SW is not used.
Outside
force
Outside
force

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents