FUTABA 4PK-2.4G SuperR Instruction Manual page 59

Adjustment method for VTR curve
(Preparation)
- With the jog dial, move the blinking cursor up or down to select "FWD-
TYP". Use the plus (+) or minus (-) keys to select "VTR".
- With the jog dial, move the blinking cursor up or down to select "RATE"
and make the following adjustments:
Setup items
RATE :Forward side rate
TG.P :Curve switching
point
FWD-TYP :Forward side curve
selection
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up or down operation.
1
Forward side adjustment
Use the plus (+) button to adjust for a faster response. Use the minus (-)
button for a slower or mild response.
-Plus (+) button- the higher the number goes on the positive side, the
faster the response will be at center of throttle response.
-Minus (-) button- the higher the number goes on the negative side, the
milder or softer it is in the center of the throttle response.
2
Curve switching point adjustment
With the jog dial, move the blinking cursor up or down to select "TG.P".
Use the plus (+) or minus (-) buttons to move the point you prefer. This
gives you the opportunity of switching the curve point in relation to the
throttle trigger position.
3
Brake side adjustment
With the jog dial, move the blinking cursor up or down to select "BRK-
EXP". Use the plus (+) button to adjust for a faster brake response or
use the minus (-) button for a slower or milder brake response.
4
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button once).
Throttle EXP "THEXP"
Curve type Select button
- Select with the (+) or (-) but-
tons.
Switching point
A ve r t i c a l c u r s o r l i n e t h a t
shows the cur ve switching
point is displayed on the setup
screen graph.
Adjustment range
RATE :-100 ~ 0 ~ +100%
FWD-TYP :EXP, VTR, CRV
TG.P :20 ~ 80%
BRK-EXP :-100 ~ 0 ~ +100%
Adjust buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value:
RATE and BRK-EXP "0"
TG.P "50"
For the VTR curve, only the
high side can be set. The
b ra ke b e c o m e s t h e E X P
curve.
59