FUTABA 4PK-2.4G SuperR Instruction Manual page 123

Calling the setup screen
*Calling from menu screen
(Opening Screen)
Menu screen call
by
MENU 1
MENU1/2 selection
by button
MENU 2
Select the function
by button
Press t
he button
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
Press t
he
DIRECT SEL
Press the button set
at this function.
System function setup
1
Select the setting item by (JOG) button up or down operation,
(Setting the battery type)
Select the "BATT-TYP", and select the mode by pressing the (+)
or (-) button.
"NiMH5 LiFe2" :Futaba rechargeable type battery
"DRY 4CELL" :Dry cell battery (alkaline battery recommended) 4 batteries
(Setting the liquid crystal backlighting mode)
Select the "LCD-BLHT", and select the mode by pressing the (+)
or (-) button.
"KEY-ON" :Fixed time backlighting ON after button operated.
"ALWAYS" :Backlighting always ON
"OFF" :Backlighting OFF
(Setting liquid crystal backlighting time)
Select the "LHT-TIME", and use the (+) and (-) buttons to set
the ON time. When "KEY-ON" is set at the preceding item, this
ON time becomes effective.
(Jog button LED mode)
Select the "JOG-BLHT", and use the (+) and (-) buttons to set
the ON time.
"LCD-BLHT" :Link to LCD screen backlight setting
"OFF" :Jog button LED OFF
•Select the setting item by
* b l i n k s a t t h e c u r r e n t
setup item.
button
button
System Functions "SYSTM"
Setup items
BATT-TYP
button
LCD-MODE :Backlighting mode
LHT-TIME
JOG-BLHT :Jog button LED mode
CONTRAST :Contrast
BUZ-TONE :Buzzer tone
LED-MODE :LED color
DISP-SEL
2ND-COND :2nd condition function
OPE-TIME
2.4G-BND
EPA TRIM
:Battery type
:Backlighting time
:Initial screen mode
:Power off forgotten alarm
:2.4GHz band mode
:Quick EPA function
B AT T- T Y P
LC D - B LH T
MENU 1
L H T-T I M E
JOG - BLHT
CONTRAST
BUZ-TO NE
LED-MODE
MENU 2
D I S P - S E L
2ND-COND
O P E -T I M E
MENU 3
2 . 4 G - B N D
E PA T R I M
Setting item selection
The items move in the order
shown in the figure above.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Battery Type (BATT-TYP)
NIMH 5CELL, DRY 4CELL
Backlight mode (LCD-BLHT)
KEY-ON, ALWAYS, OFF
Backlighting time (LHT-TIME)
1~30
Initial value: 10
Jog button LED mode (JOG-BLHT)
LCD-BLHT, OFF
123