Gyro mixing
GYRO SENS
Function
This mixing adjusts the gyro sensitivity from the
transmitter. The AVCS gyro (GY mode) or normal
gyro (STD mode) can be selected. Up to 3 axes can
be set.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
+
(1 second)
Activating the function
Gain channel selection
Switch direction
Gyro type,
Gain rate
● Select the setting item
with the Jog key.
Gyro setup
■ Activating the function
① Select the "MIX" item
a n d t h e n s e l e c t t h e
"ON" by pressing the +
key or ‒ key.
● When you do not use a function, set to the
"INH" side.
■ Gain channel selection
③ S e l e c t t h e
+
"CH" item and
t h e n s e l e c t
the sensitivity
setting channel by pressing the + key
or ‒ key.
Range:RUD, RUD/AIL,
RUD/ELE, RUD/AIL/ELE
Default:RUD
(For helicopters Gyro mixing)
② Select
"GYRO SENS"
from the menu with the
Jog key.
(Gyro type)
● When a Futaba GY gyro is used, gyro type "GY" is selected. This switches the gyro sensitivity
setting item to the mode and sensitivity direct reading display.
■ Gain switch selection
② Select the "SW" item
+
−
or
■ Gyro type and sensitivity setting
④ Press the Jog key and select the sensitivity setting
−
screen you want to set and then set "type" (gyro
or
type) and "rate" (gyro sensitivity) of each channel by
pressing the +key or ‒ key.
("type")Range:STD,GY Default:STD
("rate")Range:0 ∼ 100% (STD), NOR100 ∼ 0 ∼
AVC100% (GY) Default:50% (STD), 0% (GY)
● When you want to return the set value to the initial
value, press the + key and ‒ key simultaneously.
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
Gain switch direction
(Present switch position)
● Swit c h e s t o t h e
(Gyro Gain set)
and then select the
switch by pressing the
+ key or ‒ key.
Range:Cond, SwA ∼ SwH
(HELICOPTER)
select INH.
sensitivity setting
s c r e e n o f e a c h
switch direction
when the Jog key is pressed.
+
−
or
131