FUTABA 4PK-2.4G SuperR Instruction Manual page 72

6
(Cycle duty ratio setup)
Select setting item "DTY" by
(JOG) button up, down, left
or right operation. Use the
(+) or (-) button to adjust the
duty ratio.
"-3" :Brake application time becomes shortest. (Brakes lock with difficulty)
"+3" :Brake application time becomes longest (Brakes lock easily)
(Remark) For low grip, set at the - side and for high grip, set at the + side.
7
(Steering mixing setup)
Select setting item "STM" by (JOG) button up, down, left or
right operation. Use the (+) or (-) button to adjust the steering
mixing range.
- Sets the range within which the A.B.S. function is performed relative to
steering wheel operation.
Steering operation
8
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Switch setting
Use PS1, PS2, PS3 to switch the A.B.S. function ON/OFF.
See the function select switch function (See page 96).
Dial / Trim Setting
The brake return amount (ABP), delay amount (DLY) and cycle (CYC) can be con-
trolled with digital dial DL1, DL2, DL3 or digital trim DT3 etc. with the function se-
lect dial function. (See page 98)
72
DTY
Y: (Brake return time
X: (Brake
application time)
DTY (duty): X and Y ratio
A.B.S Function "A.B.S"
Duty ratio (DTY)
-3 ~ 0 ~ +3
Initial value: 0
Steering mixing (STM)
OFF, N10 ~ N100, E10 ~ E100
Initial value: OFF
When steering mixing is set and
steering operation enters the set
range, " " is displayed in front of
the number. When mixing is OFF,
the A.B.S function can operate
over the entire steering range.