Steering Exponential "Stexp - FUTABA 4PK-2.4G SuperR Instruction Manual

Steering EXP "STEXP"
This function is used to change the sensitivity of the steering servo around the neutral
position. It has no effect on the maximum servo travel.
Racers Tip
When the setting is not determined, or the characteristics of the model are unknown,
start with 0%. (When EXP is set to 0%, servo movement is linear.)
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Dial / Trim Setting
The steering EXP adjustment (RATE)
can be controlled with digital dial
DL1, DL2, DL3 or digital trim DT3
etc. with the function select dial func-
tion. (See page 90)
Steering EXP adjustment
1
When you want to quicken steering operation, use the (+)
button to adjust the + side. When you want to make steering
operation milder, use the (-) button to adjust the - side.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
56
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
•Select the setting item by
Setup item
button
RATE: Steering EXP rate
* b l i n k s a t t h e c u r r e n t
setup item.
Quick
(Positive side)
Wheel operation
Steering EXP "STEXP"
(Steering system)
Vertical cursor moves in step
with steering wheel operation.
Mild
(Negative side)
Wheel operation
Adjustment range
-100~0~+100%
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.