Subtrim "Subtr - FUTABA 4PK-2.4G SuperR Instruction Manual

Subtrim "SUBTR"

Use this function to adjust the neutral position of the steering, throttle, channel 3
and channel 4 servos.
*Subtrim adjusts the entire range of
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Subtrim adjustment
(Preparation)
- Set the steering and throttle digital trims to the neutral "0" posi-
tion. Set CH3 to the center "0" position.
- Select the channel to be set by (JOG) button up or down op-
eration.
1
(Subtrim adjustment)
Use the (+) or (-) button to adjust the center.
(Each channel can be set similarly.)
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
48
the servo in the set direction.
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Subtrim "SUBTR"
(All channel)
90deg
Use to adjust the neutral position
Channel
ST :Steering
TH :Throttle
CH3 :Channel 3
CH4 :Channel 4
Set the steering and throttle digi-
tal trims to the neutral "0" posi-
tion.
Channel selection
- Select by (JOG) button up or
down operation.
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Subtrim
ST :L100~R100
TH :B100~F100
CH3 :-100~+100
CH4 :-100~+100
Initial value : 0