Custom Menu - FUTABA 4PK-2.4G SuperR Instruction Manual

Custom Menu

A menu matched to the purpose (custom menu) can be created by using the menu cus-
tomize function.
A different menu can be created for each model memory.
In addition, custom menus can be copied to other models by using
menu copy of the model copy function (p.110). There is a method
which modifies the arrangement or adds (other than LEVEL3) or
removes menus locally from the LEVEL1, LEVEL2, BIGCAR,
and LEVEL3 basic menus and a method which changes all the
menus to personal use only.
One point
This function allows modification of the menu list and
addition (except LEVEL3) or removal of functions. All
the functions can also be grouped at MENU1 only de-
pending on the purpose.
Example of setting BRAKE (brake mixing) where nothing
was set at LEVEL2 MENU1.
Menu assignment
1
Call the menu screen from the initial screen by (JOG) button
up, down, left, or right operation.
2
Use the (+) button to Select the MENU1 or MENU2 screen
to be edited.
3
Press the (-) button for about 1 second. A confirmation beep
is generated and the menu customize screen is displayed.
4
Select the location where the function is to be assigned or
modified by moving the cursor by (JOG) up, down, left, or
right operation.
5
Use the (+) or (-) button to select the function to be assigned.
6
When assignment is complete, end by returning to the menu
screen by pressing the (END) button.
40
or
Push Push
(Opening Screen)
(MENU1 screen)
Push
(MENU2 screen)
(approx. 1sec)
Push Push
(CUSTOMIZE MENU screen)
The highlighted item is the cur-
rently selected function.