Function Select Switch "Swtch - FUTABA 4PK-2.4G SuperR Instruction Manual

Function Select Switch "SWTCH"

This function allows selection of the function to be performed by the switches
(PS1/PS2/PS3) and setting of the direction, etc. of operation.
-The table to the right shows the functions that can be assigned to each push switch.
-PS1 and PS2 can be made alternate operation (ON/OFF switched each time SW pressed).
(NOR/ALT)
-The direction of operation of PS3 can be reversed. (NOR/REV)
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Function select switch setup
1
(Setting SW selection)
Select the item you want to set by (JOG) button up, down,
left, or right operation.
2
(To select or change a function for SW)
Select one of the functions for "SW" by pressing (+) or (-) button.
(To change the operation mode)
Select othe operation mode for "SW" by pressing (+) or (-) button.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
96
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
Function Select Switch "SWTCH"
•Select the setting item by •Select the setting item by
button
* blinks at the current setup item.
* b l i n k s a t t h e c u r r e n t
setup item.
button
Direction of operation setting
(NOR/ALT)
Function selection
Setup item selection
- Select by (JOG) button up,
down, left or right operation.
Setup buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Initial value:
PS1,PS2,PS3 :"OFF", "NOR"