About Transmitter Antenna and Receiver
About The Transmitter Antenna
Adjust the antenna verti-
cally to the ground.
Warning
Adjust the antenna vertically to the ground.
Otherwise, the operating range may become shorter.
Never hold only the antenna.
Hold the grip handle. Otherwise, the antenna may be damaged.
The antenna position can be changed in the range as shown in figures A and B. However, please
do not apply unnecessary force or shock.
The internal cable may be damaged; thus transmitting distance decreases and it may cause malfunction.
The antenna is a screw-on type and can be removed. However, do not remove the antenna ex-
cept when it must be replaced.
If the transmitter antenna terminals get dirty, the radio wave output will become weak and there is the danger that the
receiving range will be substantially shortened.
When the antenna is changed, it requires the metal
part of the antenna to be held firmly while putting it
on.
The antenna cannot be mounted to T4PKSR (by rotating the
middle part of the antenna).
There might be small glitch when the antenna
of the transmitter is brought close to servos,
ESCs or other peripheral devices.
This is not an issue but please keep this symp-
tom in mind, especially when setting-up.
28
Antenna
A
Antenna Moving Range
Antenna
W h e n t h e ante n n a i s
changed, it requires the
m et al par t of t h e an -
tenna to be held firmly
while putting it on.
B