Before Using; Features - FUTABA 4PK-2.4G SuperR Instruction Manual

Before Using

Features

-2.4GHzSS (Spread Spectrum) radio communication system
Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4GHz
band automatically. This system minimizes the interference from other 2.4GHz systems.
-Model memory for 40 models
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be
used. A model memory with different setups can be created by using the model copy func-
tion.
-Two function selection modes: Menu Selection and Direct Selection
The setup screens are called from menu screens. The menu screen can be selected from
among 4 levels (LEVEL1/LEVEL2/LEVEL3/BIGCAR).
Frequently used (high degree of urgency) functions can be assigned to direct selection but-
tons which quickly call the assigned function. (8 functions)
-Menu customizing
Function menus can be customized as desired. The menu order, display function and other
functions used by individual models only can be displayed.
-Brake mixing for large cars (BRAKE)
Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted
independently.
-4WS mixing for crawlers and other 4WS type (4WS MIX)
This function can be used with crawlers and other 4WS type vehicles.
-Dual ESCs mixing for crawlers cars (DUAL ESC)
ESC at the front and rear are controlled independently.
-Gyro mixing (GYRO MIX)
The sensitivity of Futaba car rate gyros can be adjusted from the T4PKSR.
-CPS-1 mixing (CPS MIX)
LED lighting and flashing control using our CPS-1 channel power switch can be matched to
steering and throttle operation by switch only.
-Anti-skid braking system (A.B.S)
This function applies the brakes so that the tires of gasoline engine cars, etc. do not lose
their grip on the road even when braking at corners.
-Throttle acceleration (ACCEL)
Gasoline engine cars have a time lag before the clutch and brakes become effective.
The TH-ACCEL function reduces this time lag.
-Throttle speed (THSPD)
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the
model to not accelerate smoothly. By setting the throttle speed function, operation can be
performed smoothly and easily. It also suppresses battery consumption.
-Start function (START)
A pre-set throttle position, less than full throttle, to be used for the initial acceleration off
the line without having wheel spin. When the trigger is released, auto-start is turned off and
12