FUTABA 4PK-2.4G SuperR Instruction Manual page 95

1
Control system setup)
Operate the (JOG) button up and down and select the set-
ting item "CTRL".
Press the (+) or (-) button and select the function.
"INH" : Function OFF
"CH4 FUNC" : ON/OFF by switch set at the 4th CH
"STRNT" : ON at steering neutral
"STREND" : ON at both sides of steering
"THRNT" : ON at throttle neutral
"THR FWD" : ON at throttle forward side
"THRBRK" : ON at throttle back (brake) side
"THNT+BK" : ON at throttle neutral and back (brake) sides
2
(ON/OFF switching position selection)
Operate the (JOG) button up and down and select the set-
ting item "POSI".
Press the (+) or (-) button and select the ON/OFF position.
Since the ON/OFF state is dis-
played at the right side of the
setting item "CTRL", setting can
be confirmed while operating
the function to be controlled (for
example, throttle).
3
(ON/OFF type setup)
Operate the (JOG) button up and down and select the set-
ting item "TYPE".
Press the (+) or (-) button and select the type of LED lighting.
Normal ON/Off type or flashing can be selected.
"NORMAL" : Normal ON/OFF type
"FLASH" : Flashing display
4
(Flashing cycle setting)
When flashing type "FLASH" was selected at the setting item
"TYPE" the flashing speed (cycle) can be set.
Operate the (JOG) button up and down and select the set-
ting item "CYCL".
Press the (+) or (-) button and select the flashing speed (cy-
cle).
5
To end setting, return to the opening screen by pressing the
(END) button three times (for direct selection, press the (END)
button once)
Special Mixes "S-MIX" (CPS MIX)
*Shows the ON/OFF state
ON/OFF Position (POSI)
5 ~ 95
Initial value: 50
95