Model Reset "M-Res; Model Memory Reset - FUTABA 4PK-2.4G SuperR Instruction Manual

Model Reset "M-RES"

This function resets the contents of the currently called model memory.
The reset method can be selected from among the 3 types described below. These resets
do not initialize the adjuster function (ADJST), system function (SYSTM), lap reset
(LAP-L), user name (NAME), and receiver type (FASST-C1/FASST-C2) , servo re-
sponse selection function (RXSYS).
DATA RESET
Initializes only the function setting data. The menu function and direct selection function are not initialized.
MENU RESET
Initializes the menu function and direct selection function. Other settings are not initialized.
ALL RESET
Initializes the menu function, direct selection function, and the setting data of each function.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Model Reset
Select the setting item "TYPE" by (JOG) button up or down
operation and press the (+) or (-) button and select the reset
type from among "DATA RESET", "MENU RESET", and "ALL
RESET".
1
(Reset execution)
Select the setting item "EXEC" by (JOG) button up or down
operation.
Press the (+) and (-) buttons simultaneously for 1 second.
When "COMPLETE!" blinks at the bottom of the screen,
memory resetting is complete.
2
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button
once).
112
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Model Reset "M-RES"
Current model #
Setup item selection
- Select by (JOG) button up or
down operation.
Reset type selection
- Use the (+) and (-) buttons to
make adjustments.
Type (TYPE)
DATA RESET
MENU RESET
ALL RESET
Reset execution button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.