MAC address of GigaAccel 180 eth0 is printed on the side of GigaAccel 180 as "1
Set the DHCP service start up option as follows.
# vi /etc/sysconfig/dhcpd
Restart the DHCP service after editing the configuration file.
# service dhcpd restart
A.9 TFTP service settings
Edit the xinetd configuration file as below so that TFTP service will start
# vi /etc/xinetd.d/tftp
disable = no ← change "yes" to "no"
(Do not change other parameters)
Restart xinetd after editing its configuration file.
# service xinetd restart
Copyright © Fixstars Corporation. All rights reserved.