5.7 Installation of TFTP Service
This section describes the procedures to install the tftpd32 service edtion that is a
free software. Go to tftpd32 download page, and download "tftpd32 service edition"
(zip file format).
After downloading tftpd32, unpack the .zip archive and install tftpd32 along the
install guide. (You can install by the following command. "tftpd32_svc –install")
The service name is "Tftpd32 service edition".
After complete installation, start tftpd32 service. Open "Control Panel" > "System
and Maintenance" > "Administrative Tools" > "Services". You can start it in the
5.8 TFTP Service settings
Run tftpd32_gui.exe in the unpacked folder and configure as follows. If the
firewall warning appears, close firewall warning.
After tftpd32 start, click "Setting" button.
tftpd32 start page
Copyright © Fixstars Corporation. All rights reserved.