Installation Of Terminal Software; Start Up Terminal Software - Fixstars GigaAccel 180 User Manual

5.9 Installation of Terminal Software

To confirm the boot status of GigaAccel 180 (to show Serial Console), terminal
software is necessary. This section describes the installation of "Tera Term
Pro"(http://ttssh2.sourceforge.jp/index.html.en). Go to the download page and
download the installer. Run the installer and install with the default settings.

5.10 Start up Terminal Software

After install, a shortcut icon will be created. Double-click it and run teraterm.
First setup the serial port. In "New Connection" window, select "Serial (Port:
COM1)", and then click "OK" button.
After serial console appears, Select menu "Setup" > "Serial port...". Then "Serial
port setup" window is opened.
In "Serial port setup" window, configure as follows.
Parameter
Port
Baud rate
Data
Parity
Stop
Flow control
Transmit delay
Click "OK" button, and select menu "Setup" > "Save setup...". Then complete
setting.
New connection window
Value
COM1
115200
8 bit
none
1 bit
none
0msec/char 0msec/line
Copyright © Fixstars Corporation. All rights reserved.
26