5 Installing GigaAccel 180
This section describes how to set up CIFS boot in GigaAccel 180. If you are
using nfs boot, there is no need to read this section.
The OS is Yellow Dog Enterprise Linux on GigaAccel 180.
It is assumed that Windows XP Professional is installed on the host
machine(x86, x86_64). For connecting GigaAccel 180, please refer to "3
Connection of GigaAccel 180".
Have the following items on hand for this section
File system for CIFS(ga180-ydel6.0-cifsroot.ext22.214.171.124.11)
boot file for CIFS(ga180-cifsroot-X.X.XX-X.ydl.X.img)
(2 files above is in
GigaAccel 180 Install DVD > WindowsSupport > CIFS)
IP addresses for connecting to the external network
Follow the instructions below to connect eth1 port to the external network.
IP address must be available to connect to the external network from both
the host and GigaAccel 180.
"5.4 Installation of necessary services"
* The file name for CIFS is "ga180-ydel6.0-cifsroot.ext3." + "IP address of GigaAccel
180". This IP address is assigned by the DHCP server when GigaAccel180 boots up.
Therefore, you must prepare a CIFS file system for each GigaAccel180 installed. If
you have multiple GigaAccel180s installed, please copy the CIFS file system and
5.2 Creating new account
Create new account to access to CIFS in the host machine. If you set default value
to the boot file for CIFS, create account which name is "root", and password is
Copyright © Fixstars Corporation. All rights reserved.