Troubleshooting - Fixstars GigaAccel 180 User Manual

In the setting window, configure as follows.
Parameter 1
Base Directory
Global Settings
Syslog server
DHCP Options
TFTP Security
TFTP
configuration
Advanced
TFTP Options
After configuration click "OK" button and re-start "tftpd32_gui.exe".
The next section describes the DHCP setup. Click "DHCP Server" tab, and then
configure as follows. After configuration, click "Save" button and save the settings.
Parameter
IP pool starting address
Size of pool
Boot File
WINS/DNS Server
Default router
Mask
Domain Name
Additional Option
*1 If you install two GigaAccel 180, set Size of pool to 2.
*2 If "Additional Option" is left blank, IP adress of host workstation will be set to
"192.168.2.10", CIFS mount account will be "root" and the password will be "passw0rd".
If you want to modify them, set all of them as follows.
Additional Option
The first field : 17
The second field : //{Host IP Address}/{Shared Folder} /cifs -o user={Account
name},password={Password}
(ex:default value)
The second field : //192.168.2.10/CIFS /cifs -o user=root,password=passw0rd
[Note] You can enter the second field in less than 63 characters. If an invalid value is
entered, GigaAccel 180 can not boot. If GigaAccel 180 can not boot, please refer to the

troubleshooting.

Parameter 2
-
-
-
-
-
Timeout
Max Retransmit
Tftp port
Local ports pool
Option negotiation
PXE Compatibility
Show Progress bar
Translate Unix file names
Bind TFTP to this address
Allow ' ' As Virtual root
\
Use anticipation window of
Value
192.168.2.11
1
ga180-cifsroot-X.X.XX-X.ydl.X.img
Empty
Empty
255.255.255.0
Empty
Empty
Copyright © Fixstars Corporation. All rights reserved.
Value 1
C: tftpboot
\
TFTP Server
DHCP Server
Turn off all
Persistant leases
Bind DHCP to this address
(192.168.2.10)
Read Only
3
6
69
Empty
Check
Uncheck
Check
Check
Check(192.168.2.10)
Check
Check(8192 byte)
25