Download  Print this page

Appendix D - Common Console Commands - Fixstars GigaAccel 180 User Manual

Video accelerator card
Hide thumbs

Advertisement

Appendix D – Common Console Commands
Press the 's' key during GigaAccel 180 start up to display the command prompt.
The following describes the common commands.
Command
boot
reset-all (or 'reboot')
version
printenv
setenv [parameter] [value]
Description
Start from the reading of boot image.
Restart from the open firmware boot.
Display open firmware version.
Display environmental information of the open
firmware.
Set environmental variables of the open firmware.
Copyright © Fixstars Corporation. All rights reserved.
42

Advertisement

loading