Download  Print this page

Network Installation Of Additional Packages - Fixstars GigaAccel 180 User Manual

Video accelerator card
Hide thumbs

Advertisement

5.12 Network installation of additional packages

It is possible that CIFS doesn't have packages needed in your enviroment. In this
case, you can use yum to add packages. Ensure that configuration settings allow
GigaAccel 180 to connect to the external network. Also, make sure to have on hand
the Yellow Dog Enterprise Linux user name and password which were notified
separately.
Please input your Yellow Dog Enterprise Linux user name and password in
baseurl in the following 3 files. And then, please save them.
# vi /etc/yum.repos.d/yellowdog-base.repo
[base]
name=Yellow Dog Linux 6 Base
baseurl=http://USERNAME:PASSWORD@www.ydl.net/cell/yum/6.0/base/
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
# vi /etc/yum.repos.d/yellowdog-extras.repo
[extras]
name=Yellow Dog Linux 6 Extras
baseurl=http://USERNAME:PASSWORD@www.ydl.net/cell/yum/6.0/extras/
enable=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
# vi /etc/yum.repos.d/yellowdog-extras.repo
[extras]
name=Yellow Dog Linux 6 Extras
baseurl=http://USERNAME:PASSWORD@www.ydl.net/cell/yum/6.0/extras/
enable=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
* In the above example, Yellow Dog Enterprise Linux user name is "USERNAME" and
password is "PASSWORD".
Now, if your Network has proxy server, you need to configure the proxy server.
According to the enviroment of the proxy server, add the following.
# vi /etc/yum.conf
proxy=http://(PROXY Server Address):(Port Number)
proxy_username=(username for proxy server)
proxy_password=(password for proxy server)
Copyright © Fixstars Corporation. All rights reserved.
28

Advertisement

loading