4.11 Start up GigaAccel 180
If the installation of GigaAccel 180 is complete, GigaAccel 180 will start up during
the host machine start up. Follow the instructions below to login to GigaAccel 180.
(1) Console login
Shortly after the host machine has started up the GigaAccel 180 OS will also
start up, and a login prompt appear in the console window. Then you can login
as follows.
Login name:
Password:
* To login GigaAccel 180 and to operate, we recommend ssh login described in the
following.
(2) SSH login
Shortly after the host machine has started up the GigaAccel 180 OS will also
start up. After Giga Accel 180 has booted, you can perform SSH login.
Login IP address:
Login name:
Password:
Also, the current GigaAccel 180 status can be confirmed using serial console.
Please refer to "E.2 Start up troubleshooting" for troubleshooting.
"root"
Password entered during installation process
192.168.2.11
"root"
Password entered during installation process
Copyright © Fixstars Corporation. All rights reserved.
12
Need help?
Do you have a question about the GigaAccel 180 and is the answer not in the manual?