Download  Print this page

Fixstars GigaAccel 180 User Manual page 49

Video accelerator card
Hide thumbs

Advertisement

boot-file root=/dev/ram"(*2) in console command prompt and press enter, then
reboot. The reboot command is "> reboot".
*2 When the host OS is Windows, enter "> setenv boot-file root=/dev/ram
ramdisk=131072".
"E3407 : Load failed" message
-
Failed to read boot image. Confirm TFTP server settings and firewall
settings.
"Root-NFS : Server returned error" message
-
Error occurred during NFS mount. Check the NFS server error log
(/var/log/message)
"kernel panic – not syncing : No init fount" message
-
GigaAccel 180 disk image is incorrect. Confirm the directory structure at
NFS mount path.
"mount: Mounting /cifs/ga180root-cifs.ext3.xxx. xxx. xxx. xxx on /sysroot failed:
No such file or directory" message appear, and reboot over again.
-
Confirm the configuration of tftpd32 Additional Option.
Confirm that the shared folder name is correct.
Confirm that user account or password is correct.
Freezes while displaying the message "Mounting CIFS filesystem ..."
-
Confirm the configuration of tftpd32 Additional Option.
Confirm that host IP address is correct.
Copyright © Fixstars Corporation. All rights reserved.
See "Appendix D – Common Console Commands"
See "4.8 TFTP service settings"
See "5.8 TFTP service settings"
See "5.8 TFTP service settings"
45
See "4.2 Disable services"

Advertisement

loading