Download  Print this page

Dvd Installation Of Additional Packages - Fixstars GigaAccel 180 User Manual

Video accelerator card
Hide thumbs

Advertisement

4.13 DVD installation of additional packages

This section describes how to install packages from DVD using the yum command.
Ensure that the installer DVD is placed in the host machine DVD drive.
Create the mount directory on the host.
# mkdir -p /nfsroot/media/DVD
Add the following line to the NFS service configuration file.
# vi /etc/exports
(setting value)
#/nfsroot/media/DVD 192.168.2.11(rw,sync,no_root_squash,no_all_squash)
After editing the configuration file, restart the NFS service.
# service nfs restart
Mount the installer DVD and the installer image on the host.
# mount /dev/cdrom /mnt -o ro
# mount /mnt/iso/ydel-X.X.X-cell.iso /nfsroot/media/DVD -o loop
* The following actions will be performed on the GigaAccel 180.
Create the mount directory on the host.
# mkdir -p /media/DVD
Mount the installer DVD on the GigaAccel 180.
# mount 192.168.2.10:/nfsroot/media/DVD /media/DVD -o ro
Create the yum repo file.
# vi /etc/yum.repos.d/yellowdog-dvd.repo
[dvd]
name=Yellow Dog Linux DVD
baseurl=file:///media/DVD
enable=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
Disable other yum repo files.
# cd /etc/yum.repos.d
# mv yellowdog-base.repo yellowdog-base.repo.disabled
# mv yellowdog-extras.repo yellowdog-extras.repo.disabled
# mv yellowdog-updates.repo yellowdog-updates.repo.disabled
Copyright © Fixstars Corporation. All rights reserved.
15

Advertisement

loading