APRILIA RSV 1000 R FACTORY Workshop Manual page 86

RSV 1000 R - RSV 1000 R FACTORY
• Undo the two clips
WARNING
When removing the throttle body proceed with
care as it is still connected to the fuel tank via
the fuel hose.
•
Grip the throttle body firmly and move it up and away
from the intake flanges with small rocking movements.
•
Place the entire throttle body and fuel tank, which are
connected to each other, on a clean surface.
When reassembling :
- the fuel delivery hose must not be twisted or squeezed
by other components; if it is damaged or degraded in
any way, it must be replaced;
- the fuel delivery hose must be positioned in such a way
as to reach the right hand side of the throttle body from
below, passing between the two intake flanges;
- the throttle body must be perfectly seated on the intake
flanges;
- the clips must be fully tightened down.
FUEL SYSTEM
3 - 19