APRILIA RSV 1000 R FACTORY Workshop Manual page 60

GENERAL TECHNICAL INFORMATION
To reset partial odometer 1 (TRIP 1), display the reading and
hold down the TRIP/V key for at least 3 seconds.
To reset partial odometer 2 (TRIP 2) display the reading and
hold down the TRIP/V key for at least 3 seconds.
IMPORTANT The partial odometer readings refer to the pe-
riod since they were last reset.
•
The partial odometer readings (TRIP 1 / 2) are reset
when the battery is disconnected from the vehicle.
DISPLAY : COOLANT TEMPERATURE
- The coolant temperature display reads "---" when the
sensor reads a temperature below 34°C (93°F).
- The current temperature reading is displayed without
flashing when the sensor reads a temperature between
35°C (95°F) and 114°C (237°F);
- The display flashes when the reading is between 115° C
(239° F) and 135°C (275°F). The warning led also lights
up to indicate that the temperature is in the danger zone.
- The display will flash 135°C (275°F) if the temperature
exceeds this value (with warning led on).
WARNING
If the coolant temperature sensor is discon-
nected or damaged, the dashboard error led
turns on ( ) and the coolant temperature is not
read.
Thermometer range : 35-135°C (95-275 °F).
2 - 28
RSV 1000 R - RSV 1000 R FACTORY