A: Copying Audio Animator To Ram, Rom Or Hard Disk - Applied Engineering AUDIO ANIMATOR User Manual

ApPENDIX A
Copying Audio Animator to RAM, ROM
or Hard Disk
The System
If you want to run Audio Animator from your RAM, ROM or
hard disk, you mus t use the GS/OS system 5.0. The GS/OS
version we've included with the Audio Animator was th e
latest at the time the card was packaged. However, the Audio
Animator disk does not coma in all of the GS/OS files, just
those system files needed to run the program and access any
disk drives you may have connected. Check with your Apple
dealer for GS/OS upgrades and documentation .
• :. Important: You must have the AA driver,
CARD8530.MIDI in your DRIVERS folder in the
SYSTEM folder (pathname /"BOOT. DISK"/SYSTEM
/DR IVEl~S).
You must also have Tool 32 and Tool 33
in the Tools folder in the SYSTEM folder (pathname
/"BOOT.DISK"/SYSTEM/TOOLS).
Where's the Program?
The Audio Animator program itself is contained in the
AA. S Y S 1
6 file. The
AAP ARAMS
fil e is created
by
the program
and adjusted each time you quit the program. AAPARAMS
keeps track of which part of the program (Digitizer or
Sequencer) you were in when you last quit and rerums you to
that part when you restart. The othe r settings saved in the
AAPARAMS file are:
Digitizer settings
Color, Volume leve/s, VU On or Off, Record Sample Rate,
Single or Continuous Play, the Effects menu's settings for
Amplification setting, Echo Amplification and Echo Interval,
the Setup menu's settings for Playback Channel, Effects
Channel, and Record Channel.
Sequencer settings
Color, the last tempo setting, and all Serup menu settings
(Filters and Set MIDI Delay).
82 App. A - Copying Audio Anima tor ...
[