Tr (Track); Close Box; Pl (Play); Rc (Record) - Applied Engineering AUDIO ANIMATOR User Manual

TR (Track)
The TR (Track) column numbers the tracks, 1-8. You cannot
change the values in this column.
Close Box
The small square in the left corner of the Title Bar is the Close
Box. Clicking in this box performs the same function as
selecting Close from the File menu. If you have made any
changes to the currently open file, you'll be asked if you want
to save the changes. Choose Yes, No, or Cancel. If the file is
untitled, you'll be given a chance to name and save the file.
PL (Play)
Control which tracks playback by clicking in the PL (Play)
column.
An
arrow will appear in the PL column of the
selected tracks. You can playback all tracks, specific tracks,
or no tracks while recording or playing. For example, you
can begin playing just the bass track, then, while still playing,
add the drums, and melody by clicking in the PL column of
the desired track.
RC (Record)
Click in the RC (Record) column to select the track to which
you'll record. You can record to only one track at a time. An
underlined arrow will appear in the RC column of the track
to
which you'll record.
When you have a track set to record, you can select where
the track will begin recording either by setting the measure
in the Measure--Beat box or by clicking in the desired
measure within the editor. When you press record, any of
the tracks set to play will be played while you record.
LP (Loop)
Click in the LP (Loop) column to select which tracks you
want to repeat. The return arrow will appear in the
COIUllU1
next to the tracks that will repeat.
.:. Note: If you begin playing a track past the end point
of the track set to repeat, the track will not be
repeated. You can copy blank measures to make
the tracks end at the same place.
AA - The Sequencer
r