Applied Engineering AUDIO ANIMATOR User Manual page 29

,"
MasterTracks Jr. Users
In order for MasterTracks]r. to recognize the Audio
Animator, you must copy and rename the AA driver
(CARD8530.MIDI) to CARD6850.MIDI. The drivers are
located in the DRIVERS folder in the SYSTEM folder
(pathname "BOOTDISK"/SYSTEM/DRIVERS). You must
then set the interface to "Internal card" from the "MID!
Setup" option of the "Goo?ies" menu.
1-:-
Wan/jug! Do not use your original disks.
1)
Copy the AA driver CARD8530.MIDI,
to
the
DRIVERS folder in the SYSTEM folder of your
MasterTracks boot disk.
from /"AA ,BOOT"/SYSTEM/DRIVERS
to
/"MTJR.BOOT"/SYSTEM/DRIVERS
2) Rename the CARD8530.MIDI file to CARD6850.MlDI.
3) Boot the MasterTracks program.
4) Choose MIDI Setup from the Goodies menu.
5) Choose Internal card under Port.
-:- Note:
MasterTracks]r. also requires that Tool 32 and
Tool 33 be in the Tools folder in the System folder
(pathname /" M1JR. BOOT"/SYSTEM/TOOLS).
Ch. 3 . The Box 15