Ch. 5- The "Setup" Options; Channel Record Filter; Event Record Filter - Applied Engineering AUDIO ANIMATOR User Manual

CHAPTER FIVE
The "Setup" Options
The Setup menu contains options that allow you to filter out
any of the 16 channels and several events, such as pitch bend
and modulation, for record or playback. Each of the options
has its own dialog box with click boxes to
toggle
the options
on and off. The Setup menu also has the option, "Set MIDI
Delay" which allows you to slow down the MIDI output for
low-end MIDI devices that may not be able to handle info at
high speeds.
Channel Record Filter
The Channel Record filter allows you to choose which
channels you want on and off. You can click on the individual
boxes to control each channel or choose All Channels On or
All Channels Off to control all at once. (X'ed box = channel
on, clear box = channel off).
Channe I Record Filter
I
nil
Channell On
I
nl! Channell Off
I
[gJ13
[2]lq
[2]15
1:8:116
[ l i }
~
The Channel Record Filter Dialog
Event Record Filfer
When you clear any of the Event Record Filter options
(uncheck the box), that event will be ignored while
recording. Your MIDI instrument must have the feature --
Foot Controller, Breath Controller, etc. -- before it can be
recognized or ignored. If your instrument is not equipped
with an event, Audio Animator will not care if the box is X'ed
or not. (See picture next page.)
Ch. 5- The "Setup" Options 75