Playback Channel; Record Channel; Effects Channel; Default Play Rate - Applied Engineering AUDIO ANIMATOR User Manual

Table of Contents

Advertisement

CHAPTER SIX
The "Setup" Options
Playback Channel ...
You can choose to playback through the Left Channel, the
Right Channel, or Both Channels. Cancel leaves the settings
as they were before you choose the option.
Record Channel ...
The Record Channel option lets you select which channel you
want to
record.
D
If
you have a mono input device and set the Record
Channel to Both Channels, you'll be recording
sound on one channel and silence on one channel.
.:.
Note: Most mono inputs feed to channel
one.
The
VU meter will show which channel is getting the
input.
D
If you have a microphone inputing to the left
channel and have the Record Channel set to the right
channel, you'll be recording
silence.
D
Sounds recorded on only one channel (mono) can
be played back through both channels by setting
Playback Channel to Both
Channels.
Effects Channel ...
To activate this option, you must be working with a stereo
recording. Use the Effects Channel option to dictate whether
the Effects you select will affect both channels or just the
channel currently displayed. Using this option, you can, for
example, playa segment from one channel backwards while
leaving the same segment on the other channel the same.
Default Play Rate
This option will set the Playback Sample Rate back to what it
was when loaded. Raw Data and AIFF format files will be set
to
22,200 Hz. All other format files will be set to the Playback
Sample Rate at which they were last saved.
Set Play to Record Rate
This is the easy way to set your Playback Sample Rate to the
same setting as your Record Sample Rate.
Ch. 6 - The "Setup" Options
51

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AUDIO ANIMATOR and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents