Event Playback Filter; Set Midi Delay; Play/Record Delay - Applied Engineering AUDIO ANIMATOR User Manual

Event Playback Filter
The Event Playback Filter will let you filter out events during
playback. This means that you can record a track with pitch
bend and key pressure enabled and then turn off these
options for playback.
HIDI [vent PIOMbock Filter
IS]
Hotes
IS] Hodulation
IS] Polupnonic Keu Pressure
r8l
Program Change
IS]
Breath Controller
r8l
Foot Controller
I2l
Chonnel Pressure
I2l
All Other Controllers
r8l
Pitch Bend
All [vents On
I
All [vents Off
I
MIDI Event Playback Filter
When you filter any of the options, that event will be ignored
while playing. If your instrument is not equipped with an
event, Audio Animator will not care if the box is X'ed or not.
Set MIDI Delay
The Set MIDI Delay option is for the low-end MIDI devices
that cannot handle MIDI information at extremely high rates.
Set HIOI Dela~
PloY/Record DeiaM (us): 152
I
m
Mi#WWi¢iWUHiiH#@¥J
I
Panic Mton Deloy (us): 532
I
IlIDW%!fI Iiffili@ffi.tltillfM
Ok
~J
Cancel
Set MIDI Delay Dialog
Play jRecord Delay
If you find that you have to turn your MIDI device off and
back on before it will playa piece or that some notes don't
seem to be recording, you may need to set the Play/Record
Delay. (Try a setting of 76 or 152.)
Ch. 5- The "Setup' Options 77