Applied Engineering AUDIO ANIMATOR User Manual page 109

The "silent wave" used to create the window will be
replaced with the clipboard contents.
8) Save (Ll-S) the file to whatever disk you want. (Refer
to
the Save instructions in Chapter 2 if you don't
know how to change volumes, etc.
End the file's name with the sequence number, for
example, Laughs.1 will be your first save, Laughs.2
your second, etc. This will help you keep track of
the files' order to make Appending easier.
9) Close the window you have just saved.
10) Return to the window you are segmenting.
11) Check the size of the remaining segment as
indicated on the cassette label.
'>
If the Select Region is too large to save to
your other disk, repeat the steps above.
'>
If the Select Region shows a size that can be
saved
to
disk, use the Save As command to
rename the file with the sequential number (Ex:
Laughs.2). This saves the extra steps of cutting,
opening a new window, selecting all, etc.
Segmenting is complete. You can now load the
entire file back into the program by Opening the
first file (F ile . 1) then Appending the other files in
sequence (File. 2, File. 3, etc.).
App. E - Saving Large Digitized Files... 95